edge - type joints should not be used in ______ applications.\n- stress\n- mismatch\n- funky\n…

edge - type joints should not be used in ______ applications.\n- stress\n- mismatch\n- funky\n- relaxed\n\nquestion 3\n______ bars are used during welding to localize and remove heat from the weld area.\n- cold\n- sink\n- klondike\n- chill

edge - type joints should not be used in ______ applications.\n- stress\n- mismatch\n- funky\n- relaxed\n\nquestion 3\n______ bars are used during welding to localize and remove heat from the weld area.\n- cold\n- sink\n- klondike\n- chill

Answer

Brief Explanations:

Edge - type joints are not suitable for stress - bearing applications as they may not distribute stress well. Cold bars are used in welding to localize and remove heat from the weld area by absorbing the heat.

Answer:

  1. A. stress
  2. A. Cold