which of the following tools would be most appropriate for removing door panels or other pieces of interior…

which of the following tools would be most appropriate for removing door panels or other pieces of interior trim?\nflat - head screwdriver\na metal pry bar.\nplastic door panel trim tool.\nclip removal pliers.\n5 multiple choice 1 point\nthis question is not like the previous ones. it has the word except. look for the choice that could not cause the described situation. read the entire question carefully before choosing your answer.\nall of the following are true about threaded inserts except:\na helical insert is considered a permanent repair\nan appropriately sized tap is used to re - tap the hole.\nwhen the threads are repaired a different sized fastener from the original must be used.\nthe original threaded hole is enlarged with a drill\n6 multiple choice 1 point\na technician wants to repair the threads on an oxygen sensor hole when replacing and o2 sensor. the threads are not badly damaged and dont need to be drilled and tapped. what is the most likely repair the technician will use?\na solid - bushing insert\na thread chaser\na threaded insert\na key - locking insert

which of the following tools would be most appropriate for removing door panels or other pieces of interior trim?\nflat - head screwdriver\na metal pry bar.\nplastic door panel trim tool.\nclip removal pliers.\n5 multiple choice 1 point\nthis question is not like the previous ones. it has the word except. look for the choice that could not cause the described situation. read the entire question carefully before choosing your answer.\nall of the following are true about threaded inserts except:\na helical insert is considered a permanent repair\nan appropriately sized tap is used to re - tap the hole.\nwhen the threads are repaired a different sized fastener from the original must be used.\nthe original threaded hole is enlarged with a drill\n6 multiple choice 1 point\na technician wants to repair the threads on an oxygen sensor hole when replacing and o2 sensor. the threads are not badly damaged and dont need to be drilled and tapped. what is the most likely repair the technician will use?\na solid - bushing insert\na thread chaser\na threaded insert\na key - locking insert

Answer

Question 4

Brief Explanations:

A plastic door panel trim tool is designed specifically for removing door panels and interior trim without causing damage. A flat - head screwdriver can scratch, a metal pry bar is too aggressive, and clip - removal pliers are for clips, not general trim removal.

Answer:

Plastic door panel trim tool

Question 5

Brief Explanations:

When repairing threads, if the repair is done properly with a helical insert etc., the same - sized fastener as the original can be used. A helical insert is a permanent repair, an appropriately sized tap is used for re - tapping, and the original hole is often enlarged with a drill for insert installation.

Answer:

When the threads are repaired a different sized fastener from the original must be used.

Question 6

Brief Explanations:

Since the threads are not badly damaged and don't need to be drilled and tapped, a thread chaser is used to clean and restore the threads. Solid - bushing inserts, threaded inserts, and key - locking inserts are for more severe thread damage.

Answer:

A thread chaser