install the valve stem squarely through the mounting hole in the wheel. damage to the valve stem may occur…

install the valve stem squarely through the mounting hole in the wheel. damage to the valve stem may occur if:\na) too much soapy water is applied to the valve stem.\nb) the valve stem is pulled through at an angle.\nc) the wrong tpms sensor is used.\nd) temperatures are below 50 degrees fahrenheit.

install the valve stem squarely through the mounting hole in the wheel. damage to the valve stem may occur if:\na) too much soapy water is applied to the valve stem.\nb) the valve stem is pulled through at an angle.\nc) the wrong tpms sensor is used.\nd) temperatures are below 50 degrees fahrenheit.

Answer

Brief Explanations:

When installing a valve - stem, pulling it through at an angle can cause mechanical stress and potential damage. Applying soapy water (for lubrication) in excess is not likely to damage the valve - stem. Using the wrong TPMS sensor affects functionality rather than causing damage to the valve - stem. Temperature below 50 degrees Fahrenheit does not directly damage the valve - stem during installation.

Answer:

B. The valve stem is pulled through at an angle.