mj: dimensional accuracy\nuse the information below to answer the question.\nother than the initial heating…

mj: dimensional accuracy\nuse the information below to answer the question.\nother than the initial heating of the resin before it goes to the print head, there is no heat involved with material jetting (mj). this reduces the possibility of warpage or shrinkage of the print. because there is no temperature gradient change, mj is a stable, accurate printing process.\nhowever, there is the possibility of shrinkage because when the part cures with uv light, there is an amount that will be reduced in size. that effect can be compounded with larger pieces.\naccuracy\nbecause of the support material used in this process, there is a very high degree of dimensional accuracy. with mj, there is a tolerance of.01 millimeters, as compared with sla, which has a tolerance of 0.15 millimeters. sls has a tolerance of 0.3 millimeters, and fff is 0.5.\nwhat to avoid\ntoo much exposure to ultraviolet light could have a detrimental effect. high humidity can also affect the print, as can high heat. with mj, avoid exposure to sunlight, ambient heat, or humidity, which can cause changes in dimensional accuracy and might cause some warping.\nwhen is there a possibility for shrinkage during the material jetting (mj) process?\nwhen the last layer is completed on the print\nwhen the print cures with uv light\nwhen the first layer is created on the build plate\nwhen the support structure is dissolved

mj: dimensional accuracy\nuse the information below to answer the question.\nother than the initial heating of the resin before it goes to the print head, there is no heat involved with material jetting (mj). this reduces the possibility of warpage or shrinkage of the print. because there is no temperature gradient change, mj is a stable, accurate printing process.\nhowever, there is the possibility of shrinkage because when the part cures with uv light, there is an amount that will be reduced in size. that effect can be compounded with larger pieces.\naccuracy\nbecause of the support material used in this process, there is a very high degree of dimensional accuracy. with mj, there is a tolerance of.01 millimeters, as compared with sla, which has a tolerance of 0.15 millimeters. sls has a tolerance of 0.3 millimeters, and fff is 0.5.\nwhat to avoid\ntoo much exposure to ultraviolet light could have a detrimental effect. high humidity can also affect the print, as can high heat. with mj, avoid exposure to sunlight, ambient heat, or humidity, which can cause changes in dimensional accuracy and might cause some warping.\nwhen is there a possibility for shrinkage during the material jetting (mj) process?\nwhen the last layer is completed on the print\nwhen the print cures with uv light\nwhen the first layer is created on the build plate\nwhen the support structure is dissolved

Answer

Brief Explanations:

The text clearly states that there is a possibility of shrinkage when the part cures with UV light in the Material Jetting (MJ) process.

Answer:

when the print cures with UV light