operating a toothed section jack stand\nraising\nthe cup of a toothed section jack stand can be raised…

operating a toothed section jack stand\nraising\nthe cup of a toothed section jack stand can be raised freely. letting go of the cup will cause it to drop and stop at the next locking point.\nlocking\nthis type of axle stand is locked when the cam in the top of the jack stand slides into the toothed section, preventing the cupped section from dropping further. if the cup is at the correct height, the steel pin is inserted as an extra lock.\nlowering\ncheck that the vehicle weight is not sitting on the jack stand, before lowering the cup. if the cup needs to be lowered, the steel pin needs to be removed from the jack stand. then hold the cup with one hand and move the steel handle upwards using your other hand. the cup can now be eased down.\nthere is no weight on the axle stand.\nwhat is the first step to lower the jack stand cup?\nremove the steel locking pin.\nmove the steel handle upwards.\nhold the cup with one hand and move the steel handle upwards with the other hand.

Answer