operating a toothed section jack stand\nraising\nthe cup of a toothed section jack stand can be raised…

operating a toothed section jack stand\nraising\nthe cup of a toothed section jack stand can be raised freely. letting go of the cup will cause it to drop and stop at the next locking - point.\nlocking\nthis type of axle stand is locked when the cam in the top of the jack stand slides into the toothed section, preventing the cupped section from dropping further. if the cup is at the correct height, the steel pin is inserted as an extra lock.\nlowering\ncheck that the vehicle weight is not sitting on the jack stand, before lowering the cup. if the cup needs to be lowered, the steel pin needs to be removed from the jack stand. then hold the cup with one hand and move the steel handle upwards using your other hand. the cup can now be eased down.\nthe steel locking pin is removed.\nwhat is important while lowering the cup section?\nthat the steel pin is held with your free hand.\nthat the steel operating handle is held with both hands.\nthat the cup is held with your free hand.

Answer