operating a tubular sectioned jack - stand\nthe locking mechanism may vary on the different types of jack…

operating a tubular sectioned jack - stand\nthe locking mechanism may vary on the different types of jack - stands.\nraising\nmove the cup upwards, until the intended height is reached. align one of the holes in the tubed section with the hole in the jack stand.\nlocking\nthe cup is locked by inserting the steel pin through the holes in the jack stand and the holes in the tubular section.\nlowering\ncheck that the vehicle is not sitting on the jack stand, before you lower the cup. hold the cup or the tubed section with one hand; use your other hand to remove the locking pin and lower the cup.\ntake care to not get your hand caught between axle stand and cup!\nwhat should you take care of, before lowering the cup in a tubular sectioned jack stand?\nto not get your hand caught between the cup and the jack stand.\nthat the cup is not dropped hard on the jack stand. this might damage it.\nthat the locking pin does not break when being removed.

Answer