specified on a sticker, located on the lifting arm. never exceed the maximum load capacity of jack.\nprevent…

specified on a sticker, located on the lifting arm. never exceed the maximum load capacity of jack.\nprevent the vehicle from rolling. this can be achieved by applying the parking brake or by placing chocks behind the wheels that are not being lifted.\nalways work on firm, level flooring (preferably concrete) to prevent the ground and the car from dropping off the jack. the shop floor should be clean, free of dirt and debris, that could keep the wheels from rolling freely.\nthe jack support cup should be positioned under a solid point on the car body or chassis.\noften the car manufacturer specifies designated lifting points. these lifting points are shown in the corresponding service information and/or vehicle owners manual. positioning the jack at a non - designated lift point is dangerous and could cause damage to the vehicle.\nnote: some vehicles are designed with lift points that require a special adapter to be used in conjunction with the floor jack.\nwhat about the shop floor should be checked, before you attempt to lift the vehicle with a floor jack?\nthe floor should be firm (preferably concrete).\nthe floor must be level.\nthe floor should be sprinkled with \floor dry\, to absorb any oil leaking from the jack.

Answer