use of a jack stand in combination with a vehicle lift\nhigh jack stands are commonly used. the jack stands…

use of a jack stand in combination with a vehicle lift\nhigh jack stands are commonly used. the jack stands allow the wheels to hang freely. this is necessary when working on the brakes or parts of the suspension.\nposition the jack stands cups on load bearing, solid parts of the vehicle. lower the car lift about 2 cm. then jounce the vehicle to make sure its stable on the jack stands. if the vehicle is not stable, then bring the lift back up and reposition the jack stands.\nnote:\nnever lower the vehicle lift any further then necessary (usually a few centimetres).\nthere is a small gap between the vehicle and the jack stands.\nwhat are you checking, before lowering the lift any further?\nwhether the jack stands are placed under solid, load bearing parts.\nwhether the jack stands are set as low as possible.\nwhether the lift and the vehicle is able to freely move upward.\ncheck

use of a jack stand in combination with a vehicle lift\nhigh jack stands are commonly used. the jack stands allow the wheels to hang freely. this is necessary when working on the brakes or parts of the suspension.\nposition the jack stands cups on load bearing, solid parts of the vehicle. lower the car lift about 2 cm. then jounce the vehicle to make sure its stable on the jack stands. if the vehicle is not stable, then bring the lift back up and reposition the jack stands.\nnote:\nnever lower the vehicle lift any further then necessary (usually a few centimetres).\nthere is a small gap between the vehicle and the jack stands.\nwhat are you checking, before lowering the lift any further?\nwhether the jack stands are placed under solid, load bearing parts.\nwhether the jack stands are set as low as possible.\nwhether the lift and the vehicle is able to freely move upward.\ncheck

Answer

Brief Explanations:

The text mentions positioning jack - stands on load - bearing, solid parts of the vehicle. Before lowering the lift further, one must ensure the jack stands are on such parts for safety and stability. Also, the lift and vehicle should be able to move upward freely in case re - positioning is needed. There is no mention of setting jack stands as low as possible being a pre - lowering check.

Answer:

Whether the jack stands are placed under solid, load bearing parts. Whether the lift and the vehicle is able to freely move upward.