Question

compressed air has a lot of energy, so if not used properly, air tools and hoses can cause severe injury to the human body. for example, if an air hose is accidentally severed, the compressed air will rush out, propelling the end of the hose like a whip! an air powered tool with a loose air hose connection or coupler can be very dangerous. if the air hose should become loose from the coupler, it can act as a dangerous whip. to prevent this from happening, never fasten or repair an air hose coupler with a simple hose clamp. worn or damaged air lines should be replaced and couplers should be installed using special crimping tool. blow guns should not be used to blow dirt off your clothing or be directed toward the body. if compressed air penetrates the skin or enters through a cut, it could cause serious damage to body tissue and organs. never point a blow gun towards another individual or blow air toward their body! the following safety practices apply when using a pneumatic tools: • wear required personal protective equipment. • follow the air tool manufacturer’s operating and maintenance instructions. • check the condition of a pneumatic tool before each use; do not use a damaged tool. • do not carry a tool by the air hose, this can cause the connector to become loose. • do not yank the air hose to disconnect it from the pneumatic tool. hold the air tool firmly with one hand while releasing the hose with the other. • always follow shop safety rules for operating pneumatic tools. what should you do after using a pneumatic tool? leave the air hoses out across the shop floor; saving time for next using. disconnect the tool and reel the air hose; eliminating the danger of tripping over the hose. reel the air hose in but leave the pneumatic tool attached to it; saving time for next using.

Explanation:

Leaving air - hoses out across the shop floor is a tripping hazard. Reeling in the air - hose and disconnecting the tool helps in maintaining a safe working environment by eliminating the risk of tripping over the hose. Leaving the tool attached to the unreeled hose is also a safety risk.

Answer:

Disconnect the tool and reel the air hose; eliminating the danger of tripping over the hose.