Question

table saw safety test
directions: fill in the blank spaces with the words from the word bank.

1. you should not work on a floor.
2. the should be in place when ripping material.
3. the saw blade must be placed on the arbor with the teeth pointing the direction from which the wood is to be fed.
4. you should not remove any without the instructors permission.
5. you should not extend the saw blade as far as possible through the stock, it should be above the material being cut.
6. you should never saw or stock.
7. you should never do sawing.
8. you should always use a when ripping narrow stock.
9. you should not use this machine before the instructor has its safe use.
10. it is unsafe to stand directly with the saw blade.
11. you should not to the operator while sawing.
12. when using the rip - fence, make sure that it is in place before you begin the cut.
13. when ripping, the material being cut must be held against the table surface as well as the fence. otherwise, the operator may experience a kickback.
14. in order to protect your eyes, should always be

Explanation:

1. Working on a messy floor can be a tripping - hazard.
2. The splitter guard is important for safety during ripping.
3. Saw - blade teeth must point toward the feeding direction.
4. Guards should not be removed without permission.
5. The saw blade should be ¼" above the material.
6. Warped or twisted stock can cause problems.
7. Free - hand sawing is dangerous.
8. A push stick is used for narrow stock.
9. The instructor must demonstrate safe use first.
10. Standing in line with the saw blade is unsafe.
11. Talking to the operator can be a distraction.
12. The rip - fence should be locked in place.
13. Material should be held firmly.
14. Safety glasses protect the eyes.

Answer:

1. Messy
2. Splitter guard
3. Toward
4. Guards
5. ¼"
6. Warped, Twisted
7. Free hand
8. Push stick
9. Demonstrated
10. In line
11. Talk
12. Locked
13. Firmly
14. Safety glasses