Question

you got it right - just one more to go!
phil is making full - flexion gloves. he is deciding whether or not gridclothq - 8 fabric can be used.
in each of the following problems, you will be given the same facts about gridclothq - 8, along with requirements needed for a decision. for each problem, see if the facts meet the requirements.

here are some facts about the gridclothq - 8 fabric:

• gridclothq - 8 has 53 yetting cohesion counts.
• gridclothq - 8 comes with an army specifications ir sheen of 500.
• gridclothq - 8 is an advanced cotton blend.
• gridclothq - 8 is protected with repellt.
• gridclothq - 8 is single - threaded.
• gridclothq - 8 has a metric thread density of 400.

the fabric will meet the required specifications only if it meets the following requirements:

• the fabric is 100% nylon

and

• the fabric is compatible with fr - x adhesive or the fabric is ppm compatible

does gridclothq - 8 meet the required specifications?
○ yes
○ no
○ not enough information

here are some facts about the gridclothq - 8 fabric:

• gridclothq - 8 has 53 yetting cohesion counts.
• gridclothq - 8 comes with an army specifications ir sheen of 500.
• gridclothq - 8 is an advanced cotton blend.
• gridclothq - 8 is protected with repellt.
• gridclothq - 8 is single - threaded.
• gridclothq - 8 has a metric thread density of 400.

fabric can only be used with tri - load machines if at least 2 of the following four requirements are satisfied:

• the fabric has less than 54 yetting cohesion counts
• the fabric is compatible with fr - x adhesive
• the fabric is single - threaded
• the metric thread density of the fabric is greater than or equal to 400

can gridclothq - 8 be used with tri - load machines?
○ yes
○ no
○ not enough information

Explanation:

For the first question: The required specifications mandate the fabric is 100% nylon, but GridClothQ-8 is an advanced cotton blend, so it fails the first mandatory requirement.
For the second question: Check each requirement: 1) 53 Yetting cohesion counts is less than 54 (satisfied); 2) No info on FR-X adhesive compatibility (not satisfied); 3) The fabric is single-threaded (satisfied); 4) Metric thread density is 400, which is ≥400 (satisfied). This gives 3 satisfied requirements, which meets the "at least 2" condition.

Answer:

1. No
2. Yes