Question

safety paragraph a router is a powerful woodworking tool used to shape edges, cut grooves, and create decorative profiles. always wear safety glasses and hearing protection when using the router. make sure the bit is sharp, properly installed, and tightened before turning on the machine. ensure the workpiece is secured with clamps so it cannot move during cutting. always keep both hands on the router handles, and feed the router against the rotation of the bit for control and safety. never start the router with the bit in contact with the workpiece. allow the motor to reach full speed before cutting. take multiple light passes instead of forcing the tool through the wood in one cut. keep the cord clear of the bit, and do not remove guards or safety features. after use, turn the router off and wait until the bit has completely stopped spinning before setting it down. questions 1. what protective equipment should always be worn when using a router? 2. why is it important to check the bit before starting the router? 3. how should the workpiece be secured before routing? 4. how should the router be held during operation? 5. in which direction should the router be fed relative to the bits rotation? 6. why should you never start the router with the bit in contact with the workpiece? 7. what should you do before the router bit touches the workpiece?

Explanation:

1. El párrafo de seguridad menciona que siempre se deben usar gafas de seguridad y protección auditiva al usar un taladro - en - broca.
2. Verificar que la broca sea afilada, correctamente instalada y ajustada es importante para la eficiencia y seguridad del trabajo.
3. El workpiece debe ser asegurado con abrazaderas para evitar que se mueva durante el corte.
4. Se debe mantener las dos manos en los maníbulos del taladro - en - broca durante la operación.
5. El taladro - en - broca debe alimentarse en contra de la rotación de la broca para control y seguridad.
6. Iniciar el taladro - en - broca con la broca en contacto con el workpiece puede causar un corte incontrolado y ser peligroso.
7. Se debe permitir que el motor alcance la velocidad máxima antes de que la broca toque el workpiece.

Answer:

1. Gafas de seguridad y protección auditiva.
2. Para la eficiencia y seguridad del trabajo.
3. Con abrazaderas.
4. Manteniendo las dos manos en los maníbulos.
5. En contra de la rotación de la broca.
6. Puede causar un corte incontrolado y ser peligroso.
7. Permitir que el motor alcance la velocidad máxima.