Question

fill in the blank with the correct term learned from your study of this module.

1. a right - angle bend is also called a(n) ______.
2. rises in a section of conduit are called ______.
3. the ______ is the actual length of the conduit that will be bent.
4. also called kicks, ______ are two bends placed in a piece of conduit in order to navigate around obstructions.
5. a ______ is a large bend that is formed by multiple short bends or shots.
6. two 90° bends with a straight section of conduit between them constitute a(n) ______.
7. ______ are 90° bends made in two or more parallel sections of conduit, where the radius of each bend in conduit after the inside bend is respectively increased.

Explanation:

1.

In conduit bending, a right - angle bend is commonly referred to as a "90 - degree bend" or a "square bend". The most appropriate term here is "square bend" (or "90 - degree bend").

In the context of conduit, rises in a section of conduit are called "offsets" (specifically, when they are vertical rises, but the general term for rises in conduit is offset).

The "develop length" (or "development length") is the actual length of the conduit that will be bent. This is the length of the straight conduit before bending that will form the bent section.

Answer:

square bend (or 90 - degree bend)

2.