Question

drill press safety and use (lesson)
watch this video and fill in the blanks below with the correct words. use the drag and drop option from the choices below

1. a drill press is used for _ or _ holes in stock.
2. the ___ is what makes the drill press a power tool.
3. the ___ turns the motor on and off
4. the ___ is connected to the motor by a belt and spins.
5. the ___ allows you loosen and tighten a bit in the spindle.
6. a ___ is the name for the cutting tool mounted in the spindle.
7. the ___ is the platform that the stock rests on.
8. the ___ handle allows the user to move the spindle up and down.
9. to prevent chipout on your stock, you should use a ___.

downfeed boring drilling switch chuck or chuck key motor backer board spindle table

Explanation:

1. A drill - press is a common tool for creating holes, and 'drilling' and 'boring' are typical hole - making operations.
2. The 'motor' provides the power, making it a power tool.
3. The 'switch' controls the motor's on and off states.
4. The 'spindle' is connected to the motor by a belt and spins.
5. The 'chuck or chuck key' is used to loosen and tighten a bit in the spindle.
6. A 'drill bit' is the cutting tool in the spindle.
7. The 'table' is the platform for the stock.
8. The 'downfeed' handle moves the spindle up and down.
9. A 'backer board' helps prevent chipout on the stock.

Answer:

1. drilling, boring
2. motor
3. switch
4. spindle
5. chuck or chuck key
6. drill bit
7. table
8. downfeed
9. backer board