QUESTION IMAGE
Question
b. measurements for an unknown solution using a buret
| solution # titrant | trial #1 | trial #2 | trial #3* |
|---|---|---|---|
| mass of beaker + solution | 125.384 | 125.387 | |
| mass of solution | 7.085 | 7.084 | |
| initial level in buret | 0.04 | 0.06 | |
| final level in buret | 10.06 | 10.07 | |
| volume of solution delivered | 1.56ml | 1.01ml | |
| density of solution | 4.543g/ml | 7.028g/ml |
|average density of solution|
| percent difference | 42.95% |
*carry out a third trial on if the percent difference between trial #1 and trial #2 is greater than 5%.
use the following to calculate the percent different for trials #1 and #2:
percent difference = \\(\frac{|x_1 - x_2|}{average\\ of\\ x_1\\ and\\ x_2}\times100\\%\\) where x1 and x2 are the two calculated densities based on the experimental measurements
and show the calculation for the percent difference for each density below: (note: because percent difference is the absolute value of the difference of the two values divided by the average, it is always positive.)
average = \\(\frac{x_1 + x_2}{2}=\frac{4.543g/ml + 7.028g/ml}{2}=\frac{11.571g/ml}{2}=5.7855g/ml\\)
percent diff = \\(\frac{|x_1 - x_2|}{average}\times100\\%=\frac{2.485g/ml}{5.7855g/ml}\times100\\% = 42.95\\%\\)
volume measurements for various liquids
| volume of liquid | |
| a | 35ml |
| b | 9.1ml |
| c | 65ml |
| d | 4.5ml |
d. proper use of a bunsen burner
student was able to light the bunsen burner correctly:
student was able to adjust the bunsen burner to get a
Step1: Identify the density values for two trials
Let $x_1 = 4.543\ g/mL$ (density from Trial #1) and $x_2=7.028\ g/mL$ (density from Trial #2).
Step2: Calculate the average of the two density - values
The average $\bar{x}=\frac{x_1 + x_2}{2}=\frac{4.543+7.028}{2}=\frac{11.571}{2}=5.7855\ g/mL$.
Step3: Calculate the absolute difference between the two density - values
$|x_1 - x_2|=|4.543 - 7.028|=2.485\ g/mL$.
Step4: Calculate the percent difference
Percent difference $=\frac{|x_1 - x_2|}{\bar{x}}\times100\%=\frac{2.485}{5.7855}\times100\%\approx42.95\%$.
Snap & solve any problem in the app
Get step-by-step solutions on Sovi AI
Photo-based solutions with guided steps
Explore more problems and detailed explanations
The percent difference between the densities of Trial #1 and Trial #2 is approximately $42.95\%$.