Question

you need to follow specific steps in order to properly observe a sample on a slide using a microscope. put the steps in the right order. 1 choose 2 choose 3 choose 4 choose focus on the sample by using the coarse adjustment knob. use the clips on the stage to put the slide in place. switch to low power objective. return to scanning objective and lower the stage. use the fine adjustment knob to sharpen the focus to see your sample clearly. make sure the scanning objective in clicked into place and the stage is low. remove your slide and turn off the microscope. plug in the microscope and turn on the light bulb with the switch on the base. move the slide to center the sample over the light. switch to high power and use the fine knob to focus. 5 choose 6 choose 7 choose 8 choose 9 choose 10 remove your slide and turn off

Explanation:

First, prepare the microscope by plugging it in and turning on the light. Then secure the slide, center the sample, start with low - power focusing, switch to higher power if needed, and finally clean up by removing the slide and turning off the microscope.

Answer:

1. Plug in the microscope and turn on the light bulb with the switch on the base.
2. Use the clips on the stage to put the slide in place.
3. Move the slide to center the sample over the light.
4. Switch to low power objective.
5. Focus on the sample by using the coarse adjustment knob.
6. Use the fine adjustment knob to sharpen the focus to see your sample clearly.
7. Switch to high power and use the fine knob to focus.
8. Make sure the scanning objective in clicked into place and the stage is low.
9. Return to scanning objective and lower the stage.
10. Remove your slide and turn off the microscope.