QUESTION IMAGE
Question
woodworking technology
safety test answers
use only these words to fill in the blanks on the safety
test. these words may be used more than once.
1/2 inch (2)
immediately (3)
all
injured (2)
always
instructor (4)
ansi z87
lift
attention
location
away
never (2)
behind
operating
break (2)
operator (2)
brush
others
chemical abc
permitted
chuck key
placed
clean
plug
cleaned up
plywood
clear
pulled
contact
removed
count
respect
cross cuts
restart
dangerous
reach
disconnected
reported (2)
down (2)
safe
dry
safety test
dull
side
faceshield
speed
fire
stopped (2)
fingers
stick
flat
switches
forbidden
tools
free
turned on (2)
hand (2)
two
handle
violation
held
walking
horseplay
working
missouri city schools
industrial technology safety
construction / woodworking
students name: jerde aaliyah
date:
age: 17 grade: 12 school:
period:
all students must pass this safety test before they will be allowed
to operate power machines or other hazardous equipment. the purpose
of this test is to determine the students knowledge of safety practices
necessary in the use of machines, tools, equipment, and materials.
directions: the following statements are to be made complete by
the correct word or words on the list to the right.
remember to letter!!! 1/2 inch single stroke block
- in case you are injured in the shop, you must report your
injury at once to your ________.
- all machine special \set-ups\ should be checked by the
instructor before the power is ________.
- scraps of materials must always be cleared away when
the machine has ________.
- any unnecessary loud noises or whistling are distracting
and are not ________ in the shop.
- remove electric cords from outlets by pulling on the ________
rather than on the cord.
- a stream of compressed air must never come in contact
with your hands or whole ________.
- ________ is the proper manner in which to move about in
the wood shop.
- clean-up is the responsibility of ________ students.
- pass sharp edged or pointed tools with the ________ forward.
- all power equipment (stationary or portable) shall have
its power ________ before changing blades or bits, so there is no
possibility of it being accidentally turned on.
- before cleaning or when leaving a machine safety zone,
the machine should be turned off and the blade completely ________.
- if it is necessary to use an extension cord, see that it lies
________ on the floor so no one will trip over it.
To solve this fill - in - the - blank safety test for woodworking technology, we analyze each question based on woodworking safety knowledge:
Question 1
In case you are injured in the shop, you must report your injury at once to your \_\_\_\_\_.
- In a woodworking shop, when an injury occurs, the first person to report to is the instructor. So the answer is "INSTRUCTOR".
Question 2
All machine special "set - ups" should be checked by the instructor before the power is \_\_\_\_\_.
- Before using a machine, after the instructor checks the set - up, the power is turned on. So the answer is "TURNED ON".
Question 3
Scraps of materials must always be cleared away when the machine has \_\_\_\_\_.
- When the machine has stopped (is not in operation), we clear away the scraps. So the answer is "STOPPED".
Question 4
Any unnecessary loud noises or whistling are distracting and are not \_\_\_\_\_ in the shop.
- Such behaviors are not permitted in the shop as they can be a distraction. So the answer is "PERMITTED".
Question 5
Remove electric cords from outlets by pulling on the \_\_\_\_\_ rather than on the cord.
- The correct way to remove a cord from an outlet is to pull on the plug. So the answer is "PLUG".
Question 6
A stream of compressed air must never come in contact with your hands or whole \_\_\_\_\_.
- Compressed air should not be directed at the body, especially the whole body or hands. But in the context of woodworking safety, it's about not directing it at the body (the whole "body" but from the word list, "HANDS" is already mentioned, and the other option related to the body part here is "FINGERS"? Wait, no, the word list has "BODY"? Wait, looking at the word list, the words are as given. Wait, the word list has "HANDS" (2), "FINGERS", etc. Wait, the correct term here is that compressed air should not be used to clean yourself or your body. From the word list, the appropriate word is "BODY"? Wait, no, the word list provided has "HANDS" (2), "FINGERS", "FLAT", etc. Wait, maybe "HANDS" is already used, and the other part is "BODY" but it's not in the list. Wait, looking at the word list again: the words are: ¼ INCH (2), IMMEDIATELY (3), ALL, INJURED (2), ALWAYS, INSTRUCTOR (4), ANSI Z87, LIFT, ATTENTION, LOCATION, AWAY, NEVER, BEHIND, OPERATING, BREAK (2), OPERATOR (2), BRUSH, OTHERS, CHEMICAL ABC, PERMITTED, CHUCK KEY, PLACED, CLEAN, PLYWOOD, CLEANED UP, PULLED, CLEAR, REMOVED, CONTACT, RESPECT, COUNT, RESTART, CROSS CUTS, REACH, DANGEROUS, REPORTED (2), DISCONNECTED, SAFE, DOWN (2), SAFETY TEST, DRY, SIDE, DULL, SPEED, FACESHIELD, STOPPED (2), FIRE, STICK, FINGERS, SWITCHES, FLAT, TOOLS, FORBIDDEN, TURNED ON (2), FREE, TWO, HAND (2), VIOLATION, HANDLE, WALKING, HELD, WORKING, HORSEPLAY.
Wait, maybe the answer is "BODY" is not there. Wait, the correct safety rule is that compressed air should not be directed at the skin or body. From the word list, the closest is "HANDS" but it's already mentioned. Wait, maybe "FINGERS"? No, the sentence is "whole \_\_\_\_". So maybe "BODY" is not in the list. Wait, perhaps I made a mistake. Let's re - check. The correct answer here is "BODY" but since it's not in the list, maybe the intended word is "HANDS" but no, the first part is "hands or whole \_\_\_\_". Wait, the word "BODY" is not in the list. Wait, looking at the word list again, the word "HANDS" is there (2 times). Wait, maybe the answer is "HANDS" but the first part is "hands or whole \_\_\_\_" which doesn't make sense. Wait, perhaps the correct word is "FINGERS" no. Wait, maybe the answer is "BODY" is not av…
Snap & solve any problem in the app
Get step-by-step solutions on Sovi AI
Photo-based solutions with guided steps
Explore more problems and detailed explanations
To solve this fill - in - the - blank safety test for woodworking technology, we analyze each question based on woodworking safety knowledge:
Question 1
In case you are injured in the shop, you must report your injury at once to your \_\_\_\_\_.
- In a woodworking shop, when an injury occurs, the first person to report to is the instructor. So the answer is "INSTRUCTOR".
Question 2
All machine special "set - ups" should be checked by the instructor before the power is \_\_\_\_\_.
- Before using a machine, after the instructor checks the set - up, the power is turned on. So the answer is "TURNED ON".
Question 3
Scraps of materials must always be cleared away when the machine has \_\_\_\_\_.
- When the machine has stopped (is not in operation), we clear away the scraps. So the answer is "STOPPED".
Question 4
Any unnecessary loud noises or whistling are distracting and are not \_\_\_\_\_ in the shop.
- Such behaviors are not permitted in the shop as they can be a distraction. So the answer is "PERMITTED".
Question 5
Remove electric cords from outlets by pulling on the \_\_\_\_\_ rather than on the cord.
- The correct way to remove a cord from an outlet is to pull on the plug. So the answer is "PLUG".
Question 6
A stream of compressed air must never come in contact with your hands or whole \_\_\_\_\_.
- Compressed air should not be directed at the body, especially the whole body or hands. But in the context of woodworking safety, it's about not directing it at the body (the whole "body" but from the word list, "HANDS" is already mentioned, and the other option related to the body part here is "FINGERS"? Wait, no, the word list has "BODY"? Wait, looking at the word list, the words are as given. Wait, the word list has "HANDS" (2), "FINGERS", etc. Wait, the correct term here is that compressed air should not be used to clean yourself or your body. From the word list, the appropriate word is "BODY"? Wait, no, the word list provided has "HANDS" (2), "FINGERS", "FLAT", etc. Wait, maybe "HANDS" is already used, and the other part is "BODY" but it's not in the list. Wait, looking at the word list again: the words are: ¼ INCH (2), IMMEDIATELY (3), ALL, INJURED (2), ALWAYS, INSTRUCTOR (4), ANSI Z87, LIFT, ATTENTION, LOCATION, AWAY, NEVER, BEHIND, OPERATING, BREAK (2), OPERATOR (2), BRUSH, OTHERS, CHEMICAL ABC, PERMITTED, CHUCK KEY, PLACED, CLEAN, PLYWOOD, CLEANED UP, PULLED, CLEAR, REMOVED, CONTACT, RESPECT, COUNT, RESTART, CROSS CUTS, REACH, DANGEROUS, REPORTED (2), DISCONNECTED, SAFE, DOWN (2), SAFETY TEST, DRY, SIDE, DULL, SPEED, FACESHIELD, STOPPED (2), FIRE, STICK, FINGERS, SWITCHES, FLAT, TOOLS, FORBIDDEN, TURNED ON (2), FREE, TWO, HAND (2), VIOLATION, HANDLE, WALKING, HELD, WORKING, HORSEPLAY.
Wait, maybe the answer is "BODY" is not there. Wait, the correct safety rule is that compressed air should not be directed at the skin or body. From the word list, the closest is "HANDS" but it's already mentioned. Wait, maybe "FINGERS"? No, the sentence is "whole \_\_\_\_". So maybe "BODY" is not in the list. Wait, perhaps I made a mistake. Let's re - check. The correct answer here is "BODY" but since it's not in the list, maybe the intended word is "HANDS" but no, the first part is "hands or whole \_\_\_\_". Wait, the word "BODY" is not in the list. Wait, looking at the word list again, the word "HANDS" is there (2 times). Wait, maybe the answer is "HANDS" but the first part is "hands or whole \_\_\_\_" which doesn't make sense. Wait, perhaps the correct word is "FINGERS" no. Wait, maybe the answer is "BODY" is not available, so maybe the intended word is "HANDS" but that's a repetition. Alternatively, maybe the answer is "FINGERS" but no. Wait, perhaps I should look at the standard woodworking safety rules. Compressed air should not be used to clean clothing or the body. So from the word list, the word "BODY" is not there. Wait, maybe the answer is "HANDS" but that's already in the sentence. I think there is a mistake in my analysis. Let's move to the next question.
Question 7
\_\_\_\_\_ is the proper manner in which to move about in the wood shop.
- The proper way to move in a wood shop is to walk (in a proper, safe way). From the word list, "WALKING" is the correct answer.
Question 8
Clean - up is the responsibility of \_\_\_\_\_ students.
- Clean - up is the responsibility of all students. So the answer is "ALL".
Question 9
Pass sharp edged or pointed tools with the \_\_\_\_\_ forward.
- When passing sharp tools, we pass them with the handle forward. So the answer is "HANDLE".
Question 10
All power equipment (stationary or portable) shall have its power \_\_\_\_\_ before changing blades or bits, so there is no possibility of it being accidentally turned on.
- Before changing blades or bits, we disconnect the power. So the answer is "DISCONNECTED".
Question 11
Before cleaning or when leaving a machine safety zone, the machine should be turned off and the blade completely \_\_\_\_\_.
- After turning off the machine, the blade should be stopped (completely stopped). From the word list, "STOPPED" is the answer.
Question 12
If it is necessary to use an extension cord, see that it lies \_\_\_\_\_ on the floor so no one will trip over it.
- The cord should lie flat on the floor. So the answer is "FLAT".
Final Answers (for each blank in order)
- INSTRUCTOR
- TURNED ON
- STOPPED
- PERMITTED
- PLUG
- (Wait, maybe the correct word here is "BODY" but it's not in the list. Alternatively, maybe the intended word is "HANDS" but it's already in the sentence. Maybe there is a typo. But based on the word list, let's re - check. The word "FINGERS" is there, but "whole fingers" doesn't make sense. Alternatively, the word "BODY" is not in the list. Maybe the answer is "HANDS" but it's a repetition. I think there is an error in the question or the word list. But proceeding with the other questions)
- WALKING
- ALL
- HANDLE
- DISCONNECTED
- STOPPED
- FLAT